Mach3 VFD control via Modbus using brain file

[A_Camera]

Yes it did help indeed! Thank you again. I can now send M3, M4, and M6 commands via the MDI in Mach.

The only thing that I have to do now is change the ' RPM DRO' To read and display the 'True RPM' Values.
I know that I have to use a screen editor to change the 'RPM' somehow from no. 39 to '1002'. Thing is, I'm using 'Screen4' and 'MachScreen' and I cannot find a procedure to do this.

I see...

Perhaps you can't fix it Screen4, or it is not no. 39 but something else, I don't know. I used the standard screen.

[visedge]

I see...
Perhaps you can't fix it Screen4, or it is not no. 39 but something else, I don't know. I used the standard screen.

I'm using the 2010 Screenset so the original Mach script editor doesn't work with the 2010 set. I have however found a way to change the DRO no. to 1002. I've used 'MachScreen' to do it, you can see where to edit it when you open the screen file, goto -> view -> overview. Here you can see an overview of all the DRO's LED's & Buttons etc. All the values can be edited here on-the-fly. So I've made the changes to the screen but I will not know if it is working until I get in to work tomorrow. I will let you know how it goes...

[A_Camera]

I'm using the 2010 Screenset so the original Mach script editor doesn't work with the 2010 set. I have however found a way to change the DRO no. to 1002. I've used 'MachScreen' to do it, you can see where to edit it when you open the screen file, goto -> view -> overview. Here you can see an overview of all the DRO's LED's & Buttons etc. All the values can be edited here on-the-fly. So I've made the changes to the screen but I will not know if it is working until I get in to work tomorrow. I will let you know how it goes...

Cool. I hope you get it up working as it should.