Luthier CNC

[AndyUK]

I think you may be right. I need to dismantle much of my machine anyway so best get to cleaning the ballscrews!

In my hurry I didn't attach the nipples to my HIWIN carriages so this is probably a good opportunity to do that as well. I see you have made a post about these nipples: Do you know if the following are a good way to go for greasing the carriages? Are they also suitable for greasing ballscrews/nuts?

https://www.toolstation.com/laser-grease-gun/p29224
https://www.toolstation.com/lithium-grease/p89691

Thats what I use, and it works on the ballnuts that Fred has sent me. I think the nipples for the HGR20s are the same, but I haven't gotten that far yet. Highly recommend the flexible extension for the gun, and don't try loading the grease gun for the first time in toolstation's car park when you're inside the car. Not a clean experience. Worth watching a youtube video or two on loading, attaching, and de-attaching grease guns if you've never had the pleasure to using them before, there are a couple of nuances.

This is the flexible bit I'm talking about:
https://www.toolstation.com/laser-gr...nnector/p33147