. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hi Andy. Didn't see an answer to your question about VFD harmonics. I fitted an emi filter from the mains to the input of my control box using one of these https://www.ebay.co.uk/itm/EMI-RFI-F...edirect=mobile . This plus star farthing all the shielded cabling eliminates the problem I had when the vfd was running (false estops). Also mounted my vfd external to the controller again to avoid electrical noise getting through.

  2. #2
    Quote Originally Posted by MikeyC38 View Post
    Hi Andy. Didn't see an answer to your question about VFD harmonics. I fitted an emi filter from the mains to the input of my control box using one of these https://www.ebay.co.uk/itm/EMI-RFI-F...edirect=mobile . This plus star farthing all the shielded cabling eliminates the problem I had when the vfd was running (false estops). Also mounted my vfd external to the controller again to avoid electrical noise getting through.
    Hi MikeyC,

    Thanks for the tips! I bought three of those from Ali Express a while back; I chose three because I placed them after the mains input and before each main component (VFD, 24V PSU, and Drive PSU) - hopefully so that noise from each didn't affect the other, because it had two filters to pass through, if that makes any sense. When it came to wiring them though, I realised the IEC cable wasn't what I wanted (being that theres three inside the cabinet), so I got some alternatives with spade connectors on. Something like this.

    Quote Originally Posted by NordicCnc View Post
    Thanks for that link!

    By the way do yiu have a youtube chabbel? I saw a very similar if not the exact same build. Joe Harris is the name of the channel.

    Skickat från min SM-A530F via Tapatalk
    Yep - If you look at the start of this thread, you'll see its heavily based on Joe's build. I'm a bit more camera-shy though, so haven't gotten on the old youtube.

    In other news, I'm slowly but surely wiring away. Taking a little time over it - life has become rather busy at the moment with all the other distractions :) I'll try and post a picture of current progress sometime this week.

    Thanks,
    Andy

Thread Information

Users Browsing this Thread

There are currently 9 users browsing this thread. (0 members and 9 guests)

Similar Threads

  1. BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
    By D-man in forum DIY Router Build Logs
    Replies: 57
    Last Post: 13-12-2019, 10:43 AM
  2. BUILD LOG: Build Log: 4'x4' Moving Gantry CNC Router
    By GeorgeW21 in forum DIY Router Build Logs
    Replies: 14
    Last Post: 20-01-2019, 09:33 AM
  3. BUILD LOG: Ar last!!! Started my Gantry 3-Axis CNC Build
    By MikeyC38 in forum DIY Router Build Logs
    Replies: 74
    Last Post: 16-06-2018, 11:29 PM
  4. Any sugestions how to build my gantry
    By masinecc in forum Gantry/Router Machines & Building
    Replies: 8
    Last Post: 20-09-2015, 05:17 PM
  5. BUILD LOG: Flying Gantry Build Diary
    By geoff.sim in forum DIY Router Build Logs
    Replies: 8
    Last Post: 29-05-2008, 02:53 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •