DIY PSU build query...

[JAZZCNC]

The bridge rectifier drops the voltage, it converts AC to DC you connect both outputs in series run it through the rectifier and 72v out the other side in DC.

You need capacitors to clean up the DC.



https://www.physics-and-radio-electr...rectifier.html

You need to SHUT UP until you know what your talking about because your going to cause people serious damage with your WRONG information.

[Kitwn]

You need to SHUT UP until you know what your talking about because your going to cause people serious damage with your WRONG information.

A little knowledge is a dangerous thing. Sometimes you really do need to make the effort to understand the subject correctly. Read the information in the first page or two of the link I gave in post #10.

It's also worth noting that anything other than a 'True RMS' meter can give false readings of voltages that are neither continuous or sinusoidal, as seen at the output of a rectifier without smoothing capacitors.