Losing steps/position, again

[Doddy]

Okay, nothing sinister from the ipconfig, and you've already said that you've rebooted both PC and AXBB. And different cables, and different PCs. I, for one, am running out of ideas.

[ngwagwa]

Okay, nothing sinister from the ipconfig, and you've already said that you've rebooted both PC and AXBB. And different cables, and different PCs. I, for one, am running out of ideas.

Doddy are you using a cncdrive motion controller? If so (and providing it's convenient) can you tell me what the activity light does on the controller when the PC is powered up but no software is running? Mine (most of the time) is inactive which I don't think it should be as cncdrive tell me the AXBB broadcasts itself on the network.

[Doddy]

Doddy are you using a cncdrive motion controller? If so (and providing it's convenient) can you tell me what the activity light does on the controller when the PC is powered up but no software is running? Mine (most of the time) is inactive which I don't think it should be as cncdrive tell me the AXBB broadcasts itself on the network.

Will check later tonight (I've lots of things in bits in the shed that I need to recover before taking more bits apart. But, I have a plan to get the controller out of the bench any way to slave a second machine control cable to it - so will check as you ask.