. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 07-05-2020 #1
    NordicCnc's Avatar
    Lives in Vaasa, Finland.
    NordicCnc
    Last Activity: 03-05-2024 Has been a member for 5-6 years. Has a total post count of 126. Received thanks 2 times, giving thanks to others 24 times.
    What kind of signal wires are recommended between the controller and AC servo drives? Would ethernet cables be good? Also do they need to be shielded?

    Cat5 or Cat6?

    Skickat från min SM-A530F via Tapatalk
    CNC machine build log
    Reply With Quote Reply With Quote
  2. 08-05-2020 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by NordicCnc View Post
    What kind of signal wires are recommended between the controller and AC servo drives? Would ethernet cables be good? Also do they need to be shielded?

    Cat5 or Cat6?

    Skickat från min SM-A530F via Tapatalk
    Cat5 or 6 will work provided it's shielded and you ground one end of the shield at the star point.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote

  3. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules