step and dir pulse problem Mach3

[JAZZCNC]

Hi Jazz ,
Been a few months and still having problems, so will purchase controller you mentioned the AXBB-E controller ......Is that all that I need to purchase.
Cheers
Dave

To use the AXBB-E you will need 5Vdc and 24Vdc in the control box so you might need a PSU depending on what you have already. You can use 12Vdc in place of 24Vdc if don't have it, Some people use an old PC power supply that has both 5V and 12Vdc outputs.

Other than that all you need is an Ethernet cross-over Cable if running directly to PC or a standard Ethernet cable if running through a network hub or Switch.