step and dir pulse problem Mach3

[JAZZCNC]

Nope still wont spin, also in uccnc when you set the jog why does it always revert back to 10% when you restart.

That is normal and kind of safety feature so you can't jog the machine too fast without first changing the speed.

can get spindle to spin if i type m3s12000

Well, it's working then.? The spindle won't spin unless you give it a speed. M3 is the start command, which turns on the Output which drives the Fwd command on the VFD, and S12000 is the speed. So if you type M3 or push the Start spindle button but haven't given it a speed so and it's at Zero speed then it won't spin but the Output will be active and the FWD command given to the VFD.

Also what plugin do i need to get mach3 to notice the axxb-e.

It's on the CNC drives website but why would you want to use Mach3.? It's shite compared to UCCNC and it's no longer supported.!

[mrmacca]

That is normal and kind of safety feature so you can't jog the machine too fast without first changing the speed.



Well, it's working then.? The spindle won't spin unless you give it a speed. M3 is the start command, which turns on the Output which drives the Fwd command on the VFD, and S12000 is the speed. So if you type M3 or push the Start spindle button but haven't given it a speed so and it's at Zero speed then it won't spin but the Output will be active and the FWD command given to the VFD.




It's on the CNC drives website but why would you want to use Mach3.? It's shite compared to UCCNC and it's no longer supported.!

Just to see what it was like....Have wired the vfd the way Dazp1976 suggested . but now it will only start when i turn switch on and it wont let me use any m3 commands in uccnc , so cannot change speed , not had a look at the jumper yet , will have a go in a minute
cheers

[JAZZCNC]

Don't need to do that it's set for 10V and ignore what Dazp is saying he's telling you wrong. I will explain in my next post don't anything else until I do as you could damage the VFD or Controller. Turn it off and wait 10 to 15 mins I will show you how to do it.