Chinese Spindles

[Jonathan]

Oh just noticed three of your links are for Ms Xing....lol dont believe all you read will you

I'm not sure what you mean? The price they have quoted is well within the price range on all Ms Xing's listings.

The 1530-9-12 as it is 9-12krpm looks much more suitable for your application.

is new unlike some of the links you have provided

Which?

[Ricardoco]

I'm not sure what you mean? The price they have quoted is well within the price range on all Ms Xing's listings.?

It is like those hotel rooms starting at £19 when you get there they are all booked out, Every time..

I asked her what spec were her spindles for $1920, and she has none left and it is only a guide price. and some of her spindles fall outside the top end as well..

The 1530-9-12 as it is 9-12krpm looks much more suitable for your application..

As i stated earlier in the thread i want as much flexability as possible which meant buying a seperate motor, 9k is to high for the lower limit. As you stated earlier the motors have no power at the lower speed, I will be gearing down to 2k on spindle with an approx 0-6k motor and up to 10k if need be i will be using pulleys for this, with a little left in reserve.

Which?

take a look at the pictures you cant miss it.. when i asked her if they were "used" she just said "some" Its all too easy to blag and blame the language barrier when in fact every word is understood perfectly..
.

But thanks anyhow Jonathan