Chinese Spindles

[Ricardoco]

I'm not sure what you mean? The price they have quoted is well within the price range on all Ms Xing's listings.?

It is like those hotel rooms starting at £19 when you get there they are all booked out, Every time..

I asked her what spec were her spindles for $1920, and she has none left and it is only a guide price. and some of her spindles fall outside the top end as well..

The 1530-9-12 as it is 9-12krpm looks much more suitable for your application..

As i stated earlier in the thread i want as much flexability as possible which meant buying a seperate motor, 9k is to high for the lower limit. As you stated earlier the motors have no power at the lower speed, I will be gearing down to 2k on spindle with an approx 0-6k motor and up to 10k if need be i will be using pulleys for this, with a little left in reserve.

Which?

take a look at the pictures you cant miss it.. when i asked her if they were "used" she just said "some" Its all too easy to blag and blame the language barrier when in fact every word is understood perfectly..
.

But thanks anyhow Jonathan