Software question

[dudz]

...immediately after doing this, you'll get a new table entry created on the bottom left hand side of your screen called drill (under machining)...you set all the parameters for that partiular drill routine in there (depth, drill size, plunge rate etc).

I get nothing here. I do as you instruct, press the "Drill" button, then on the left column the Drill shows under machining. I cannot get anything that lets me alter depth,drill size,plunge rate. I double click on the "drill" on the left hand column, but nothing happens.

[HankMcSpank]

I get nothing here. I do as you instruct, press the "Drill" button, then on the left column the Drill shows under machining. I cannot get anything that lets me alter depth,drill size,plunge rate. I double click on the "drill" on the left hand column, but nothing happens.

Sometimes I've noticed that the drill 'settings' has shrunk down to the bottom of the screen (left hand lower part of your screen) & needs you to go & drag that part of the view up with your mouse....

[zen11777]

Dolplhin PartMaster CAM and CAD modules both have a 'Pattern' feature which provides for
the definition of a Rectangular or Bolt Hole pattern of Holes which can then be subsequently
submitted to the Drill operation. Details can be found at Dolphin Hobby Cad Cam Software, PartMaster, CNC