. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-08-2013 #20
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by JoeHarris View Post
    Thanks Jazz, What about where you are joining the various sections of the steel frame together? I am going to be tapping directly into 3mm wall steel for most of my connections...
    Joe I've drilled holes just less than dia of M12 nuts so tight fit then knocked the nuts into holes just below surface with bolt in threads to protect then weld in place then grind welds flush.

    Edit: That was for in middle of sections. At the ends were I could reach I just drilled M12 hole for bolt put nut on inside and welded from inside.
    Last edited by JAZZCNC; 17-08-2013 at 09:31 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: First steel diy CNC router build
    By ivars211 in forum DIY Router Build Logs
    Replies: 59
    Last Post: 28-07-2014, 08:29 PM
  2. BUILD LOG: Steel/Aluminium design/build, sorta smallish, cuts ali hopefully
    By mart154 in forum DIY Router Build Logs
    Replies: 27
    Last Post: 19-09-2013, 05:48 PM
  3. BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
    By Greeny in forum DIY Router Build Logs
    Replies: 8
    Last Post: 19-08-2013, 08:26 PM
  4. BUILD LOG: 7' X 4' Steel frame build
    By Ricardoco in forum DIY Router Build Logs
    Replies: 6
    Last Post: 28-10-2012, 06:02 PM
  5. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules