Quote Originally Posted by JoeHarris View Post
Cheers. What thread are those then? I think I read somewhere that you favour m5 due to number of threads but they look bigger? What do you tend to use for plated connections?

[reason I ask is my 4.2mm bit is knakered and I'm looking at replacing it with a taper bit as my chuck is not the best... If m5 is not the way to go I may not bother just now..

Joe
They are M10 Joe. I only use M5 for linear rails where they tap direct to steel box. Most other stuff like Z axis then M6 or M8 depending on plate size.

Wouldn't use a taper drill for threads there not accurate enough really, Ok for general holes.