Help needed identifying this 1300x2500 CnC Router Machine!

[george uk]

one or two pallet jacks will do the job. And if your dragging it on wood, onto the trailer, grease the wood. We just got a hugely heavy machine out of a small space with 2 of them

Depending on the weight of the machine, i might consider jacking it up one end, backing the trailer under it, connect and tighten your winch, take both jacks to the back end, jack it close to level, then pull it with the winch,

What do you think it weighs, i would say bewteen 750kg to 2500kg,

[shapebusters]

one or two pallet jacks will do the job. And if your dragging it on wood, onto the trailer, grease the wood. We just got a hugely heavy machine out of a small space with 2 of them

Depending on the weight of the machine, i might consider jacking it up one end, backing the trailer under it, connect and tighten your winch, take both jacks to the back end, jack it close to level, then pull it with the winch,

What do you think it weighs, i would say bewteen 750kg to 2500kg,

I have been told it weights 700kgs.

[JAZZCNC]

I have been told it weights 700kgs.

That sounds a little light and I would guess 1000Kgs would be more realistic. Friend and me wounce moved a much heavier machine (Wadkin 6 headed spindle moulder) up and over a 400mm high wall onto similair trailer with just 2 trolly jacks 2 Planks of wood and scaffold tube. . . . With levers and rollers you can move anything Just like the Egyptians. .


Eddy current here you go if it helps you sleep better. .

[george uk]

That sounds a little light and I would guess 1000Kgs would be more realistic............ with just 2 trolly jacks 2 Planks of wood and scaffold tube. . . . With levers and rollers you can move anything Just like the Egyptians. .

Totaly agree there Jazz, i wne and looked at 2 similar ( afa i can tell from the pics ). i think they was 1300kg and 2200kg inc power units. and yes, jacks, leavers and rollers, but they start to come undone on uneven ground, as i learnt last week