First steel diy CNC router build

[ivars211]

sorry, delete this.

[Clive S]

Sorry for double post. As I couldn't sleep, I finished x and y axis. I need some approval from clever people, so that I can continue. I also realised that I have no proper bench to put my machine anyway, so I will most likely end up welding also that.
Thanks in advance.

Have you thought about how you are going to mount the rail blocks to the frame, for instance the X rail blocks appear to be mounted to the gantry without access to the bolts. I would also wait until the clever people check your frame out and lack of table I noticed that you are ordering 5mm screws all round!! just bringing this to your attention ..Clive