Hybrid View
-
26-07-2016 #1
Last Activity: 7 Hours Ago
Neil Do you think you will need another bracket to bolt the frame to the wall at the top, shimmed as to not twist the frame
Hope you are only using he hammer to tap the connections into place
..Clive
The more you know, The better you know, How little you know
-
26-07-2016 #2
Last Activity: 03-01-2025
There are 2 additional bolts half way up bolting the frame to the wall...shimmed with custom cut bits of pipe 😁 the base is shimmed and bolted at all 4 corners so I'm hoping it's still all square....will tell when I first go to cut later today...
Originally Posted by Clive S
Neil Do you think you will need another bracket to bolt the frame to the wall at the top, shimmed as to not twist the frame Hope you are only using he hammer to tap the connections into place
Hammer was, as you suggested, to tap in the wires...who needs screwdrivers?
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 81 users browsing this thread. (0 members and 81 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks