Search:

With all that is going on at the moment and the effect it is having on everyone's lives, i would just like to point out that i will still be working and able to dispatch orders. there may be delays,...

I have added an application on our website to help corectly size the motor requirements for lots of differrnt type of applications.
Its still a work in progress, so needs a bit more work to sort out...

As the title says, we have a sale on, so use code aprilsale2019 to get your 20% discount.

Its the last day of our black friday sale where you can get 15% off from our list price.
Remember to get a heads up on sales that we have on, you should really subscribe to our newsletter.
to get...

I know what a harmonic drive gearbox is, i was just incorrect on the technical term used to describe them. I was selling them 15 years ago, but made by spinea.

Absolutely, my point was not to advise a change.
I was only pointing out that there is more to it than just resolution, and you need to also consider the critical speed on the screw.

its not just the speed of the motors, its also the critical speed of the ballscrew.
a 25mm diameter ballscrew that is 2000mm long and using a rotating nut has a critical speed of about 1400 RPM....

the screen is just metal that picks up the noise and passes this noise back to ground as current, so as long as you have a good connection to ground that is all you need. so use your initiative and...

yes, he uses the csmio-ip-a that links to the PC with an ethernet cable.

RS232 is only used to set up the kinco ac servo driver using the kinco servo software, it has nothing to do with cnc.

If you remove the rotor from a stepper motor it will demagnetise very quickly and then when you re assemble, it will not have the rated torque that it had before you stripped it down.

The F means a flat on the shaft.
I sold those motors to denford when i worked at MCP, many moons ago.

Come to zaPPautomation.co.uk buy some good shit and get a 15% discount with blackfriday2016

A ballnut once assembled should never drop a ball unless a ball return pops out.
If this happens, balls will be all over the floor.
The cheap ballnuts will have plastic ball returns and these are...

this is what we use.
Circuit breakers
http://www.zappautomation.co.uk/electrical-products/circuit-protection-and-isolation/mcb-and-rcd-devices/miniature-circuit-breakers-1-to-63a.html
(We use type...

Why would you not put the VFD in a control cabinet?
Just because it creates heat and electrical noise is not a reason to not put it in a control cabinet.
Stepper drivers, servo drivers and power...

Keep it as is, but feed an output from the relay into an input on the controller to tell it you have an estop state.

To work out the critical speed of a screw there is a calculator on our site.
http://www.zappautomation.co.uk/index.php/ecalculators.html

In the lower part of this page is a link for the...

The way he is removing the swarf with his hands is not recommended. I did that once and ended up nearly cutting the end of my finger off with a length of swarf being pulled out of my hand.
Last...

Its a nema 23, looks to be about 70-80mm long so will be between 1.8 and 2Nm.
Its 4 wire, so check the driver to see what the current is set to and then you will be quite close.

The AM is discontinued by us and we have one left in stock.
The EM range replaces the AM range and has basically the same features but is a better driver.

The order they come out makes no difference, use the wire colors as in the datasheet and you will have no problems.

your link to zapp is error 404.

this is the correct link.
Isel Aluminium Extrusions - Zapp Automation Ltd

and here

Kanya Aluminium Extrusions - Zapp Automation Ltd

Its not their main product line and there new range of product is their focus.
the closed loop steppers, integrated products and servos are their focus, and quite rightly too.

Some of the links are not working at the moment, but you can get to all the download we have on the site in this link.
dirLIST - Index of: home/
including solid works files of most of the Gten...