Paulus v.
As I said it.s 3-4 meters away from the workshop. My newly built house it.s like 10 meters away. The construction authorization was released by the owner of the towers, in this case Enel, and the City Hall. If I remember right, the minimum distance required was 7 meters. I did not bribe anyone. It is just the way it is. I do not hear any hum, but I.m quite sure they work all the time. I am not sure, if the are high or medium voltage power lines. My cnc works fine now after fixing the grounding. There is still room for improvement though.

As for the health issues, this electrical tower is here since my grandfather was young, and no one in the family had any serious health problems, and counting aunts, uncles and cousins, it is a big family.
There are people here alive which worked in the uranium mine, and they are alive today, and hardworking strong aparently healthy men that died of cancer. You have 60 years old smokers that do just fine, and 3 years old with leukemia. So, excuse my scepticism toward the recomendation of the experts, but they miss something. I am NOT saying that care and resposability are of no use. In fact they are great and make your life a lot better, but I would love to see for once, attached to a claim (regarding anything, health, nutrition, cancer, electromagnetic radiation etc) to see the study behind it, and I mean place, date, names of the people involved, telephones, emails, experiments, conclusions, reports etc. This is not a reply pointed at you, it is just about a principle. The scientific method principle. First let.s prove it, and then share it. :)

Sorry for the long reply. A couple of years ago, I did a personal study about nutrition and health, mainly about what foods should you eat, why, in what quantities, and listening and reading all the sides involved in the debate, these including vegans, vegetarians, frutarians, raw eaters, only meat, no meat, no grains, no eggs, no legumes etc, It lasted a few months and in the end, I guess the only safe way is to go out and chew grass, or eat nothing. Very little studies existed for all this claims. Anyway, if my health goes bad anytime in the future, I will keep you posted. :)


Rob.
An MDF, A4 machining area, Unsupported rails, trapezoidal screws and delrin nuts machine that works, it.s better that a fancy one that does not. And better than all is the attitude. I honestly though you have a high end hiwin rails, high pitch ballscrew, or tensioned double pinion and rack, 2.2 kw water cooled spindle, aluminium extrusion frame, vacuum table machine. All the bells and whistles. Perhaps more than a better machine, I need a better attitude towards it.

I just finished this evening installing the homes, and they seems to work just fine with 12v supply. I will however post a video these days, with the aparently last problem :)) (I know, don.t laugh), of the y axis wobble, or whip, I am not sure yet, maybe you see something I don.t. It.s not that bad and it is manifesting a bit strong only on 10-20 cm of travel.

My little mistake, is that seduced by the almost great functioning of the machine, I did a few works and sold some, and now the interest is quite big, especially for religious carvings, and I get a bit of pressure from the people in the area, and I cannot deliver. Not yet. Until I figure out if this whip is something that can ruin a ballscrew very quickly or it is not a big deal. 20mm 5mm pitch, one fixed one free end, 1500mm (4.92ft) long. We shall see.