Two Machines from one PC

[magicniner]

See how it goes, but a fundamental misunderstanding of how Mach3 works with the PP seems to be at the heart of the assumption that this will not be problematic.

[cropwell]

See how it goes, but a fundamental misunderstanding of how Mach3 works with the PP seems to be at the heart of the assumption that this will not be problematic.

In order to control the PP effectively Mach 3 has its own driver with high priority control of interrupts. That is why I endorse a separate machine. It simply takes control of the interrupts, which can severely affect any other software running.

[Boyan Silyavski]

Best would be 2 machine and no PC. Each machine its own controller. Why people love so much mach3 when dedicated controllers are so much better and cheap nowadays, i dont get it. Obviously the desire for suffering...

[ngwagwa]

And it works!
Ran both machines today cuting fresh air from the same PC for several hours without any issues. The only thing I still need to do is connect 2 keyboards and mice to the PC.

[cropwell]

And it works!
Ran both machines today cuting fresh air from the same PC for several hours without any issues. The only thing I still need to do is connect 2 keyboards and mice to the PC.

Then you will need a KVM, but be careful you get one that operates backwards as they are normally 1 Kb & Mouse for 2 PCs - you would be better off with a mechanically switched one. Like this one https://www.amazon.co.uk/Sienoc-Port...c-fefa6b9989e1 although the sockets are the wrong way round

[ngwagwa]

I am hoping I wont need a KVM as I already have both of the monitors working and I am led to believe Windoze wil work with 2 keyboards and 2 mice connected at the same time. Will find out if it is true tomorrow.

[AndyUK]

I am hoping I wont need a KVM as I already have both of the monitors working and I am led to believe Windoze wil work with 2 keyboards and 2 mice connected at the same time. Will find out if it is true tomorrow.

You're correct, absolutely no need for a KVM.

Sent from my SM-G950F using Tapatalk