Quote Originally Posted by ngwagwa View Post
The 2 readings of 2.4 were pairs from the stepper disconnected from everything else. The 0.4 on the purples I am not sure now as I only disconnected 1 of them so I knew which was which - I will double check the purples and try and trace then tomorrow providing UPS deliver in the morning otherwise it will be Saturday.
So out of stepper I have 6 wires 2 pairs each with a resistance of 2.4 and two purple wires with a resistance 0.4. The 2 pairs are connected to the drivers and i have (so far) been unable to trace the purple inside the cabinet but they are not connected together and there is no connection between the 2 puple and the other 2 pairs.