. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 06-07-2011 #1
    Swarfing's Avatar
    Lives in Swindon, United Kingdom.
    Swarfing
    Last Activity: 08-09-2018 Has been a member for 9-10 years. Has a total post count of 1,001. Received thanks 51 times, giving thanks to others 3 times. Is a beta tester for Machinists Network features.
    Jonathan interested to know what cutter you are using to cut the teeth on your pulleys?
    If the nagging gets really bad......Get a bigger shed:naughty:
    Reply With Quote Reply With Quote
  2. 06-07-2011 #2
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    Quote Originally Posted by 2e0poz View Post
    Jonathan interested to know what cutter you are using to cut the teeth on your pulleys?
    It's just a trapezium shaped form tool. I ground it by hand on to a piece of 5/16" HSS. I mentioned it in post #37. Can post a picture if you want, but there's really nothing to it...
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 10 users browsing this thread. (0 members and 10 guests)

Similar Threads

  1. Rotating Ball nut
    By drumsticksplinter in forum Lead Screws, Nuts & Supports
    Replies: 30
    Last Post: 12-05-2020, 08:01 PM
  2. Interesting Papers on heavy duty design, vibrations, composites and column design
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 15
    Last Post: 25-06-2016, 10:13 PM
  3. Rotating Ballnut Design MK3
    By Jonathan in forum Linear & Rotary Assemblies
    Replies: 0
    Last Post: 15-12-2013, 01:35 PM
  4. advice on floating bearing - outer ting rotating
    By dsc in forum Lead Screws, Nuts & Supports
    Replies: 8
    Last Post: 18-11-2013, 02:23 PM
  5. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules