Comments sought on new build: A CNC Router for RC Gliders and Planes

**njhussey** · 06-07-2015

Originally Posted by Clive S

what is the point in chopping a perfectly good cable and then putting a join in it. ..Clive

Well to start with the router will be floor mounted until I make the frame for it to live in vertically (at the rate I'm going that'll be months...)....so I was thinking to save having cables longer than I need dangling everywhere until it's finally sited I'd have a JB and when it's in its final position adjust the cables to suit....

**Clive S** · 06-07-2015

Originally Posted by njhussey

Well to start with the router will be floor mounted until I make the frame for it to live in vertically (at the rate I'm going that'll be months...)....so I was thinking to save having cables longer than I need dangling everywhere until it's finally sited I'd have a JB and when it's in its final position adjust the cables to suit....

Ah I now remember you are going to mount it vertical. But you will still have to have the continuity of the screens in the JB. ..Clive