3 Axis CNC router

**JAZZCNC** · 09-05-2016

careful with the heat gun joe you can easily cause hot spots which harden at different rate. Only a quick flash is needed and only if really needed. Few air pockets won't hurt anything.

Not quite sure what the vasoline is for thou.?

**lucan07** · 09-05-2016

Originally Posted by JAZZCNC

Not quite sure what the vasoline is for thou.?

Vaselines for the same as heat gun apparently "Some like it Hot!"

**JoeHarris** · 09-05-2016

Originally Posted by JAZZCNC

careful with the heat gun joe you can easily cause hot spots which harden at different rate. Only a quick flash is needed and only if really needed. Few air pockets won't hurt anything.

Not quite sure what the vasoline is for thou.?

Cheers Dean, I will take it easy on the heat. The Vaseline was for the mdf sides to act as a release agent... I think Clive suggested it?