Rye Quantum First Start... Drive Fault

[BEACHBLANKET]

Apologies for the multiple posts!
My findings are this:

Job1: starts and stops after 1 second.

Job2: limit exceeded in X 5016.500

Job3: limit exceeded in X 5016.500

All 3 jobs were based on material size of x1200, y600 z-15

And a square cut x200,y200 to x400,y400 depth -5mm

I'm bamboozled

Sent from my Mi A1 using Tapatalk

[finski84]

Apologies for the multiple posts!
My findings are this:

Job1: starts and stops after 1 second.

Job2: limit exceeded in X 5016.500

Job3: limit exceeded in X 5016.500

All 3 jobs were based on material size of x1200, y600 z-15

And a square cut x200,y200 to x400,y400 depth -5mm

I'm bamboozled

Sent from my Mi A1 using Tapatalk

As routerdriver has stated. Can you please post up the GCode. We can have a look at what you are trying to run. If your able to copy and paste it into a post ill be able to run it on my machine for you and see if it works

I am only at work till 10:15 this morning otherwise you may have to wait till Monday. Unless my partner goes into labour, in which case ill see you in two weeks