. .

Thread: Cncst4060

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-09-2020 #10
    Doddy's Avatar
    Lives in Preston, United Kingdom.
    Doddy
    Last Activity: 5 Days Ago Has been a member for 9-10 years. Has a total post count of 1,364. Received thanks 188 times, giving thanks to others 66 times. Referred 1 members to the community.
    Entirely possible. My thoughts are varied but includes insulation breakdown or stray wire from phase pin on the connector to the spindle housing.

    I'd pull it apart, but I wouldn't recommend others to try.

    The next test was to be a continuity test between the phase outputs on the VFD, then upstream to the spindle harness then the pins on the spindle, as well as a visual check on the terminal wiring but, again, I wouldn't recommend this if a replacement is an option.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Doddy For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules