Ready Steady Eddy

[EddyCurrent]

Now I feel responsible if it's shit so I'll have to order some as well
I was going to anyway, I like to live on the edge sometimes

Anyway just compared viscosity, West = 650 cps, Syntac 650-750 mPas, (1 cps = 1 mPas)

I'm thinking the main thing here with both of them is to get a good temperature going before pouring, it needs to be string vest only temperature minimum in the shed.

http://www.westsystem.com/ss/assets/...%20105_209.pdf
http://www.reactiveresins.com/syntac...poxyresins.pdf

[njhussey]

Now I feel responsible if it's shit so I'll have to order some as well
I was going to anyway, I like to live on the edge sometimes

Anyway just compared viscosity, West = 650 cps, Syntac 650-750 mPas, (1 cps = 1 mPas)

I'm thinking the main thing here with both of them is to get a good temperature going before pouring, it needs to be string vest only temperature minimum in the shed.

http://www.westsystem.com/ss/assets/...%20105_209.pdf
http://www.reactiveresins.com/syntac...poxyresins.pdf

Don't worry about it Eddy...I compared and they looked pretty identical...so in a rush of blood to the head bought some. You'll probably be using it before I do anyway as I've got 44 x M5 holes to drill and tap for the rails and before I can do that I've got to make a plate so I can get the linear carriages mounted to get the rails in the correct position on the box section. At the rate I'm going at the moment it will be summer by the time I've done that