Denford Triac VMC with ATC Conversion / Fix

[m_c]

put some putty on the wingdings.

I've just got to say, that typo made me smile :-)

Did you get any pics of how the servo fitted?

[Chaz]

I've just got to say, that typo made me smile :-)

Did you get any pics of how the servo fitted?

LOL, I saw that after too but left it.

No, but will sort. I do have some older pics, lemme see if I can find them.

[Chaz]

I've just got to say, that typo made me smile :-)

Did you get any pics of how the servo fitted?

Difficult to show with existing pics. Ill take a vid on the weekend.

Tight squeeze, had to remove some material for it to fit and a pic of the bracket used.

[m_c]

That's certainly a tight fit.
Any idea what size flange is on the motor?

I think a 100mm flange motor would squeeze in, however I couldn't find any with the power I was aiming for, so opted for a 110mm motor, and spacing it up.

[Chaz]

That's certainly a tight fit.
Any idea what size flange is on the motor?

I think a 100mm flange motor would squeeze in, however I couldn't find any with the power I was aiming for, so opted for a 110mm motor, and spacing it up.

Ill share the sizes tonight. Ive got the original flange drawn up as well as the info on the Panasonic 1.5 KW servo.

[Chaz]

That's certainly a tight fit.
Any idea what size flange is on the motor?

I think a 100mm flange motor would squeeze in, however I couldn't find any with the power I was aiming for, so opted for a 110mm motor, and spacing it up.

The plate that goes across for the DC motor is 115mm x 110mm (Depth).

The motor mount bolts are 81mm across from C to C. The recess flange is 100mm.

This is the motor mount for my Thor machine Y Axis (same motor as used on my Denford for spindle here).