MK1 Steel router build log 1500x800x200

[driftspin]

Yes super happy with it.
Need to do some mesurements to check for obvious F ups ...

Only have some old analogue calipers ...

Need to start buying some quality measurement tools help with aligning the rails.

And i am hoping piano wire can help with aligning...

I have some quality 140cm 8040 profile that can be used with straightening stuff.

Bouyan said one needs a 1000mm straight edge and machinist squares..
He is right i think...

Need to start figuring this out.


So...
I am about to order linear bearing parts.

Final BOM :

Rail**
2pcs*HIWIN*HGR20-L1830mm*Linear*rail
2pcs*HIWIN*HGR20-L1000mm*Linear*rail
2pcs*HIWIN*HGR20-L500mm*Linear*rail
8pcs*HIWIN*HGH20CA*Linear*carriage
4pcs*HIWIN*HGW20CC*Linear*carriage


Ballscrews*rolled*C7.
End*machining*fixed*float*for*a*pulley's

1set*C7*RM1605-L350mm*Ball*screw*with*ballnut
Change*Length*F*to*30mm*

1set*C7*RM1610-L1150mm*Ball*screw*with*ballnut
Change*Length*F*to*30mm*

2*sets*C7*RM2010-L1700mm*Ball*screw*with*ballnut
Change*Length*F*to*30mm*

2pcs*1610*Ballnut*Housing

2pcs*2010*Ballnut*Housing

4pcs ballnut grease nipples

2*sets*superior type*bk*bf12*1610

2sets*superior type*bk*bf15*2010


Any thoughts?


Grtz. Bert










Verstuurd vanaf mijn SM-A320FL met Tapatalk

Bom ordered BST Fred.

Anyone with experience from NL here?

I am curious about how this will work with dutch customs..
I understand carrier will report to tax administration..
My estimation is about 27% extra cost.
21 vat 5 import and some minor handling cost.

Guess i will pay tax and handling cost to carrier..

Grtz. Bert


Verstuurd vanaf mijn SM-A320FL met Tapatalk