New build with recycled parts on a ridiculous budget 120cm*60cm work area

[Clive S]

It's not Dave it's me ;) I'm using the beta I've enabled the master repositories so should be bang up to date, it's does read 2.8 something on boot.

I was hoping it was just an option in the ini to invert them you can do it from the stepconf but that's no good for setting up dual ballscrews.

I guess swap the wires around will be the easiest solution.

Sorry Me Can you post your ini and hal files and I will take a look, you can invert them in hal. I am In Spain again but back on Tuesday but I might be able to do it from here.

[Desertboy]

Sorry Me Can you post your ini and hal files and I will take a look, you can invert them in hal. I am In Spain again but back on Tuesday but I might be able to do it from here.

Enjoy the sangria & sunshine ;)

[Desertboy]

Got my MDF bed on now I need to make it a vac bed ;)

I used an 18mm sheet

[Nr1madman]

Got my MDF bed on now I need to make it a vac bed ;)

I used an 18mm sheet

Pics or it didnt happen :D

Skickat från min SM-G955F via Tapatalk

[Desertboy]