1200mmX900mmX170mm 4axis cnc

[Nickhofen]

Put the rails on the aluminium extrusions and run the caliper.

[Desertboy]

I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.

Is that M6 thread with a 10mm slot?

[Nr1madman]

I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.

Smart stuff ;)

Or you can just buy the longer ones?
They cant be "dropped down" but thats true if you glue two aswell

Skickat från min SM-G955F via Tapatalk

[Nickhofen]

Good to hear you solved the problem!
Its frustrating when you get parts that dont follow the specs ;)

Skickat från min SM-G955F via Tapatalk

Thanks Robert.
Yes it is frustrating but the sooner you calm, improvise and adapt you can solve the problem, it took me one whole day!

[Nickhofen]

I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.

Is that M6 thread with a 10mm slot?

Those are M6 with 8mm slot, they was suppose to be 19.5mm but actually they are 19.28mm.

[Nickhofen]

I'm going to glue 2 T nuts together so they can't twist in the slot for my clamps to make it easier to release, move and retighten.

Is that M6 thread with a 10mm slot?

Why didn't you write that yesterday???

[Desertboy]

If you have a router table make them yourself that's my plan if I ever need to mount hiwin's again with extrusion.

But if you need more I can get them from KJN and post them to you for cost I'm 3 miles (4km) away from them and need to go for more T nuts this week for my clamps so it;s no hassle.

They're £4 for 10 I needed 100 for my hiwin's so I bitterly know this lol.



Took this in their entrance, this would cost stupid money lol. Extrusion is not cheap.

[Nickhofen]

If you have a router table make them yourself that's my plan if I ever need to mount hiwin's again with extrusion.

But if you need more I can get them from KJN and post them to you for cost I'm 3 miles (4km) away from them and need to go for more T nuts this week for my clamps so it;s no hassle.

They're £4 for 10 I needed 100 for my hiwin's so I bitterly know this lol.



Took this in their entrance, this would cost stupid money lol. Extrusion is not cheap.

Thanks mate,that is very kind of you, I appreciate it.
For now I am good but I will keep in mind your offer, thanks again!!!

[Nickhofen]

Where can I find HDT5 pulleys with 10mm bore, any suggestion?

[Chaz]

Where can I find HDT5 pulleys with 10mm bore, any suggestion?

http://www.beltingonline.com - Very good to deal with.