MK1 Steel router build log 1500x800x200

[driftspin]

Well that depends really. The drives have fault feature when tripped for any of the protections, ie: current voltage etc and usually if you hit a clamp or anything strong enought to stall the motor it will fault one of the drives protections anyway. In which case provided you included the fault signal in your E-stop circuit your still safe.

However I can tell you that if you stall the motors other than hitting something then it nearly always happens at higher than 300 rpm, usually when doing rapid moves.

Hi all

I want to order some drag chain.
What did i forget..?

Things to put in the drag chain.

Ground wire 4mm2 6mm
Spindle cy 4x1.5 mm 9.6mm
y home switches cy 4x0.75 7.1mm
z home switches cy 4x0.75 7.1mm
y stepper cy 4x075 7.1mm
z stepper cy 4x0.75 7.1mm



Spindle coolingpump/fan cy 4x0.75 7.1mm
or
Supply / return line spindle cooling 2x 8mm

compressed air line 8mm
coolant line 8mm

Control valve air/mist/ coolant cy 4x0.75 7.1 mm, do you guys put that in the controls cabinet?



Miscelanious.. dustshoe retract.. power for camera, spindle illumination cy 4x0.75 7.1mm

Maybe combine all controls like valves, spindle light, mist/air, coolingpump / fan etc in 1 cable.



What did i forget?


Grtz Bert.








Verstuurd vanaf mijn SM-A320FL met Tapatalk