Quote Originally Posted by fer662 View Post
This build is looking great! I've been following for a while since I want to rebuild my table to be pretty darn close to this one, only 1.5x1. I like the fact that you used an hybrid solution for assembling the table. My workshop is in the first floor so if i had to ever move and it was all soldered it'd be a death sentence. Is there any chance you would upload the solidwords stuff? Thanks a lot!
Hi fer662,

Thanks :) Although my table is welded, and won't be coming apart without a grinder! The bolts were used to position everything for my first time welding, and are mostly aesthetic now. If I did need to separate the frame I'd need to repeat the epoxy levelling - its something I've mulled over, as we're considering building an extension which might trap the CNC in the workshop for good...

Happy to send over any pictures of the model you'd fancy and provide dimensions, but the CAD is such a sprawling mess its a nightmare to get everything together to share. I'm also not sure of the benefits - if you're serious about building, designing the CAD model yourself is very helpful in organizing your thoughts, and helps your understanding how it all fits together, and it needs to be specific to your components. There are also a number of improvements I'd make now I've gone through the process, so if you start a build log you'll get a lot of suggestions from all directions.