Denford Triac VMC with ATC Conversion / Fix

[m_c]

Any details on the servo conversion?

I've currently got mine in bits, and am currently working on the finer details of how the servo is going to fit.

[Chaz]

Any details on the servo conversion?

I've currently got mine in bits, and am currently working on the finer details of how the servo is going to fit.

Ye, Ill share some stuff when I get home. I had to do a fair bit of test fitting due to the constraints of the physical space. I am using a 1.5KW Panasonic servo.

[andy_con]

So you have upgraded the spindle to a Panasonic one? How does it work with atc?

I'm gagging to upgrade my spindle, I've got money just no options

[Chaz]

So you have upgraded the spindle to a Panasonic one? How does it work with atc?

I'm gagging to upgrade my spindle, I've got money just no options

Yep. It works well. I dont use my ATC often but functionally it works. I can do some improvements to it for fine tuning but the machine is now running at minimum as good as it would have when new.

Where are you based? You are welcome to come look at the bits.

[andy_con]

Yep. It works well. I dont use my ATC often but functionally it works. I can do some improvements to it for fine tuning but the machine is now running at minimum as good as it would have when new.

Where are you based? You are welcome to come look at the bits.

So spindle speed? How have you got it to work?

What kind of setup?

The triac has a slightly different atc seti
Up the. Most with its spindle and powered draw bar

I'm in Essex?

[Chaz]

Direct motor replacement, 4400 rpm due to slight change in gearing.

Im in West London - UB108TE, feel free to pop around, Im home Saturday if you want to see my mess.

Ill take some pics anyways to share.

[xiteamxi]

What did you end up with an m6 macro for the atc? Any chance you could post it up?

[andy_con]

Direct motor replacement, 4400 rpm due to slight change in gearing.

Im in West London - UB108TE, feel free to pop around, Im home Saturday if you want to see my mess.

Ill take some pics anyways to share.

Not knocking ya build or anything but triac comes with a 4000rpm motor so that's not really an upgrade.

I want to min of 10000rpm

What electronics do you have? I'm assuming your running mach?

I have full drawings to upgrade the atc to 10 tools just never got round to making it. It's just a new disk/bit that holds the tools and stepper motor to spin the disk